|
Features |
|
Advantages |
Certification |
|
Aqua-Therm’s
PEX-AL-PEX is manufactured with a welded aluminum layer positioned
between two layers of PEX. The pipe is 100% oxygen tight, promoting
longer life for pumps and all ferrous components. |
 |
No outer wxygen
barrier (EVOH) – e.iminates worries about abrasion, scuffing and
delanination |
Aqua-Therm’s
PEX-AL-PEX is manufactured under a quality system which meets the
requirements of ISO 9001/2000 accreditation. |
|
|
Advanced technology for long life and
peace of mind |
|
Aqua-Therm’s
PEX-AL-PEX is easy to install. The pipe can be laid out by hand..stays
where it’s put..no springing back! |
|
High durability –
rated for 200° F @ 100 psi |
Aqua-Therm’s
PEX-AL-PEX is rated for 200° F @ 100 psi |
|
Aqua-Therm’s
PEX-AL-PEX is designed as the universal solution for both radiant
(under floor heating) and potable (drinking water) applications. |
|
Resistant to
corrosion, scaling and pitting |
Aqua-Therm’s
PEX-AL-PEX has been develops, tested and approved for hot and cold
water potable service, central and under-floor heating systems and is
approved to: |
|
|
Flexibility of plastic pipe with the
durability and structural integrity of metal pipe |
|
Aqua-Therm’s
PEX-AL-PEX offers quality fitting system choices for both radiant and
potable applications. |
|
Aluminum layer
allows for easy bending and will retain the desire
shape |
ASTM F1281
NSF 14/61 (NSF-PW)
IAPMO
ICBO – Pending
SBCCI – Pending
CL-R/CL-TD - Pending |
|
Aqua-Therm’s PEX-AL-PEX is available
in a variety of coil sizes of ½”, 5/8”, ¾”, and 1” as well as straight
lengths. |
|
Flexible enough to cable through
joists, bend or snake around corners – fewer joints means less labor |
|
|
Lays down, stays down |
|
 |
|
Lightweight coils
are easy to transport, cut, handle and store
|
 |
|
|
Flexibility in
fittings systems - compression fittings for radiant – “manufactured”
press fittings for potable |
| |
|
Gypcrete is shown being poured over a PEX-AL-PEX
installation for radiant in-floor heating |
| |
| |
|
|
|
