|
|
Sunburst Sales LLC is an authorized Columbia
Distributor we carry all Columbia Waste Oil Burner models. Below
is our most popular
model. For more information contact Greg at
greg@sunburst-sales.com |
Real Boilers built by Boiler Makers Since
1936 |
|
L24 Waste Oil Boiler
|
Features
Hot water or steam
Optional thankless coil for potable hot water supply
Large cleanout door for fire-side cleaning
Heavy gauge inclined water tube design
Attractive insulated jacket
Hinged burner door for easy access to fire chamber
Choice of 3 burner/nozzle combinations
|
|
Specifications |
|
Models L24 |
175/24 |
235/24 |
350/24 |
|
Waste Oil
GPH (approx.) |
1.25 |
1.68 |
2.5 |
|
Input
BTUH (approx.) |
175,000 |
235,000 |
350,000 |
|
Gross
Output BTUH (approx.) |
140,000 |
188,000 |
280,000 |
|
Gross H.P. |
4 |
6 |
8 |
|
Combustion Volume, Cu. Ft. |
6.5 |
6.5 |
6.5 |
|
Water
Volume, Gals. |
55 |
55 |
55 |
|
Boiler
Width, with Controls |
35.5” |
35.5” |
35.5” |
|
Depth,
with Burner and Smoke Outlet |
55” |
55” |
55” |
|
Boiler
Height |
57” |
57” |
57” |
|
Flue
Outlet |
9” |
9” |
9” |
|
Compressed Air Requirements (all models) 2CFM @ 40 psi |
|
Operating
Pressure 15 psi Steam, 30 psi Water |
|
Total
Shipping Weight (approx.)
(all
models)
1,800
lbs. |
|
Electrical Requirements
(all
models)
115/60
15 Amp (220/50 7.5 AMP also available) |
|
Fuels:
Used
crankcase oil, transmission and hydraulic fluids, synthetic oils, and
other petroleum based lubricants (any weight combination up to SAE 50
including #1 and #2 fuel oil) |
|
STANDARD
EQUIPMENT:
ASME
Boiler, ASME Relief Valve, Waste Oil Burner w/Primary Control, Oil Pump
and Filter Kit, Installation Kit & Manual, Insulated Flush Jacket,
Theraltimeter Gauge, Operating and Manual High-Limit Aquastats or
Pressure Controls, Low Water Cut-Off, Cleaning Brush |
|
OPTIONAL
EQUIPMENT:
Oil
Storage Tanks, Hydronic Unit Heaters *Water Coil is an option and must
be ordered separately. |
|
Agency
Listings
(all
models) ASME stamped, ETLM listed (per UL 796, UL 296A, NFPA 31, 70 and
211) |
|
